Home > SHOP FOR STAIR RUNNERS > Stair Runner Manufacturers > Loius De Poortere Stair Runners > San Lorenzo Stair Runners

Feraghan Stair Runner 27" W Ivory Red - First Quality Roll Balance

Purchase

Price: $64.50

Main Color: Ivory

Approx. Width: Approx.27" Wide

The largest runner selection exists in 2 width categories: A 26" to 27" runner width is most common for a staircase width of 39 inches or less. A 30" to 31" wide runner is often best for stairs 40 inches wide or more. Although fewer choices - 36" wide runners (and a small group at 41") are available for extra wide stairs, more than 44 inches for example. Use filters when searching our runner selection to sort the best width for your project.

You may prefer a width in relation to your stair widths that falls outside of these suggestions. There are no "rules" as to the reveal. (Reveal = exposed area alongside the runner) Stair and hall widths vary more than runner product widths, and most often width varies within the staircase or hall. If you've been told or read that a specific reveal is the rule - this will likely result in a runner which must be custom made throughout and therefore a more expensive project. Flexibility on the reveal allows the runner to be a standard width. However, custom widths are available in some runner products, handled on a case-by-case basis. Please Inquire.

All stated runner widths are approximate.

Please visit our Resources page for additional information.

Fiber: Wool Pile

Runners are generally woven using either wool or synthetic fiber. A few in our Wool category are a blend of Wool and Nylon. Regardless of the fiber, most woven products are constructed in similar ways on the same types of looms. The two fibers differ in appearance, color and texture. Either category includes products in an array of density, quality and price. Synthetic fiber is typically the less expensive choice. (Products are either wool OR synthetic - a given pattern is NOT available in a choice of fiber)

Length: Min Length 20 Feet, Max Length 42 Feet

Runner material is sold by the linear foot, in full foot increments. Runner material ordered for a stair runner installation is generally somewhat longer than needed and is intended to be cut to its final length during installation. Please use the Calculator button on this page to determine footage for your STRAIGHT Staircase

OR

Click the Custom Landing Quote button on this page to request a quote for your custom landing project.

-If you require an end finish on one or more pieces, please add each finished length to the cart separately.

-If you need a runner to be finished to a length other than a full foot increment, we can accommodate your request. Example: 9' 6" finished length. (1) Please choose the length that rounds up to the next full foot increment - 10 linear feet in this example. (2) Choose your end finish, and add to cart. Once you've added all of your products to the cart, please proceed to checkout. (3) You'll receive a confirmation email once your order is completed - please reply to that email requesting the specific finished size of your end finished runner. We will edit your order and confirm the finished length requested via email.

Please visit End Finishes Explained for photos and more information.

Please visit our Resources page for additional information.

End Finish: Learn More