Installation Pad-Standard Size Landing
Installation pad for a standard shape/size landing – Cut to size based on your runner width and landing dimensions.
This product is for a standard shape/size single turn landing – square, rectangular or angled. (a standard size landing surface is typically 40″W x 40″L or less) This product is typically added to a custom fabricated landing order.
Pad will be cut based on the runner width as well as your landing dimensions – however the pad will need to be cut on site where it meets the riser above the landing and at the landing nosing.
Pad installed on staircase landing is generally installed along with a tack strip on the landing in front of the riser above the landing. This is done since the runner is most often cut at that point. We do not ship tack strips.
Installing the tack strip.
Cut the landing pad up to the tack strip.
If you’re purchasing pad only (you already have the runner material) – Please indicate Your Runner Width In Inches. Pad will be cut approx. 3″ smaller than your runner width (a difference of 1.5″ on each side) so that the pad will hide once installed.
